Re: V-Plate Hubs



Ernie wrote:

> If you have not done a prototype model, you could do
> it with the Cel-tek pvc or similar plastic sheet,
> ~1/16 inch thick and cut it with a rotozip or dremel
> tool. Cel tek is flexible but rigid, will bend some
> without breaking.

Thanks, Ernie... I'll look into it. (I was planning to use cardboard....)

jmr




This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.